Heat Plate

Heat Stage The Heat Stage is a temperature-controlled heating platform designed for laboratory applications, including IVF laboratories, where maintaining a suitable working temperature is important. 1\. Material: Aluminum :The device is made of aluminum, a material with good thermal conductivity that helps distribute heat efficiently across the heating surface. 2\. Weight (with PSU): 2.4 kg The total weight, including the Power Supply Unit (PSU), is 2.4 kg, making the device relatively lightweight and easy to position on a laboratory workstation. 3\. Overall Dimensions: These are the external dimensions of the device:410 × 220 × 10 mm The compact design helps optimize workspace in the laboratory. 4\. Warmed Surface Area: 345 × 220 mm This is the specified heated surface area, measuring 34.5 × 22 cm. It provides the working area for applications requiring controlled heating. 5\. Temperature Range: Ambient to 50°C The device operates from ambient room temperature up to a maximum of 50°C. This allows the user to select a suitable temperature according to the application. 6\. Spot Temperature Accuracy: ±0.3°C This specification indicates a temperature accuracy of ±0.3°C at the specified measurement point under the manufacturer's stated conditions. For example, at a set temperature of 37°C, the indicated accuracy corresponds to a range of 36.8–37.2°C. This does not necessarily mean that the entire surface maintains this uniformity. 7\. Temperature Set/Read: The device features an OLED display that allows the user to set and read the temperature, making temperature monitoring and adjustment convenient. 8\. Maximum Power Consumption: 70 W The maximum electrical power consumption is 70 watts, representing the highest specified power demand during operation. 9\. Typical Power Consumption: 40 W Under typical operating conditions, the device consumes approximately 40 watts. Actual consumption may vary depending on the operating temperature and environmental conditions. 10\. Power Supply Unit (PSU) * AC Input: 100–240 V * Frequency: 50–60 Hz * Maximum Input Current: 1.3 A * DC Output: 24 V / 5 A The power supply converts the AC mains electricity into a 24 V DC output suitable for powering the device. 11\. Warmed Glass Area: 100 × 100 mm The specified warmed glass area measures 10 × 10 cm. This identifies the heated glass section, which may be relevant for applications requiring a localized heated surface. For IVF applications, confirm the exact relationship between the warmed glass area and the overall heated surface with the manufacturer.